Install KeyDash (Mount + Power)

Step-by-step mounting and power/IGN wiring for a clean install.

6 min read

Tools & Parts

  • Mounting bracket or adhesive mount
  • Fused tap, crimp connectors, ring terminals
  • Loom, zip ties, heat shrink

Step 1 — Mount the dash

Pick a rigid, visible location. Verify that cabling can be routed safely.

Step 2 — Power wiring

Use a fused IGN 12V source and a good chassis ground. Check polarity before powering.

Step 3 — Cable management

Route away from heat and motion. Use loom and zip ties for strain relief.

Tip: Label connections so removal/service is easy later.